Chinese Concept – The train that never stops at a station | A blog about technology and how it interfaces with life.

Chinese Concept – The train that never stops at a station

by: abhivibhuti on April 16th, 2010

Hello there! If you are new here, you might want to subscribe to the RSS feed for updates on this topic.

A brilliant new Chinese train innovation – get on & off the bullet train without the train stopping. VERY COOL CONCEPT ! No time is wasted. The bullet train is moving all the time.

InnovTrn

If there are 30 stations between Beijing and Guangzhou, just stopping and accelerating again at each station will waste both energy and time. A mere

5 min stop per station (elderly passengers cannot be hurried) will result in a total loss of 5 min x 30 stations or 2.5 hours of train journey time!

How it works?

1. For those who are boarding the train: The passengers at a station embarks onto to a connector cabin way before the train even arrives at the station. When the train arrives, it will not stop at all. It just slows down to pick up the connector cabin which will move with the train on the roof of the train. While the train is still moving away from the station, those passengers will board the train from the connector cabin mounted on the train's roof. After fully unloading all its passengers, the cabin connector cabin will be moved to the back of the train so that the next batch of outgoing passengers who want to alight at the next station will board the connector cabin at the rear of the train roof.

2. For those who are getting off: As stated after fully unloading all its passengers, the cabin connector cabin will be moved to the back of the train so that the next batch of outgoing passengers who want to alight at the next station will board the connector cabin at the rear of the train roof. When the train arrives at the next station, it will simply drop the whole connector cabin at the station itself and leave it behind at the station. The outgoing passengers can take their own time to disembark at the station while the train had already left. At the same time, the train will pick up the incoming embarking passengers on another connector cabin in the front part of the train's roof.

So the train will always drop one connector cabin at the rear of its roof and pick up a new connector cabining the front part of the train's roof at each station.